The machine allows for spreading catch crops of various types and sizes of granulate. The seeding system is an electric unit that drives a universal seeding shaft with a wide speed adjustment range. The grain is dosed from a 200 or 400 liter tank. The seeding shaft transfers the seed to an eight-channel distributor, where it is pneumatically transported to flexible seed hoses made of plastic, terminated with plates. Two electric booster blowers are responsible for grain transport.
FOUR STEPS TO PRECISION
The system requires the following to be memorized: - the desired amount of grain to be sown per hectare - the working width of the machine on which the seed drill is mounted the dose that the sowing shaft dispenses during one complete revolution (this information can be read by the operator from the sowing table or obtained from a calibration test). The controller for the proper functioning of the machine needs one more parameter: - operating speed, about which information is sent in real time to the computer by a sensor from the copy wheel or GPS antenna
HIGH ACCURACY
A dedicated computer is responsible for accurate metering of the seed. The user-friendly module allows the operator to control and adjust basic seeding parameters.
EVEN OPERATION
The great advantage of this method of spreading the sown material is the certainty of its even distribution in the field regardless of weather conditions (wind) prevailing during the agrotechnical procedure.
THE UNIT FOR YOU
The standard complete SP set includes a seeder with complete electrical installation and mounting plate, flexible seeding lines (20 m), eight seeding plates and a plate beam with handles.
FOR YOUR COMFORT
The spreading plates are mounted on a special beam. They can be arranged at different intervals depending on the working width of your machine on which the seeder is mounted. SP is dedicated for aggregates with a working width in the range from 2 to 6 meters.
SECONDARY CROP SEEDER
FOUR STEPS TO PRECISION
HIGH ACCURACY
EVEN OPERATION
THE UNIT FOR YOU
